一个SVGRect，包含与给定<svg>元素对应的视口（隐式或显式）的位置和大小。当浏览器实际呈现内容时，位置和大小值表示呈现时的实际值。位置和大小值是父元素坐标系中的无单位值。如果不存在父元素（即<svg>元素表示文档树的根），如果此 SVG 文档作为另一文档的一部分嵌入（例如，通过 HTML object element），然后位置和大小是父文档坐标系中的无单位值。（如果父级使用 CSS 或 XSL 布局，

SVGSVGElement.pixelUnitToMillimeterX 已弃用

一个浮点数，表示沿视口 x 轴的像素单位（由 CSS2 定义）的大小，表示 70dpi 到 120dpi 范围内的某个单位，并且在支持此功能的系统上，可能实际上与特征匹配目标媒体。在不可能知道像素大小的系统上，提供合适的默认像素大小。

SVGSVGElement.pixelUnitToMillimeterY 已弃用

浮点数，表示沿视口 y 轴的像素单位大小。

SVGSVGElement.screenPixelToMillimeterX 已弃用

DOM 级别 2 中的用户界面（UI）事件指示给定 UI 事件发生的屏幕位置。当浏览器实际知道“屏幕单元”的物理尺寸时，此浮动属性将表示该信息; 否则，用户代理将提供合适的默认值，例如.28mm。

SVGSVGElement.screenPixelToMillimeterY 已弃用

沿着视口的 y 轴的屏幕像素的对应大小。

SVGSVGElement.useCurrentView

当前最内层 SVG 文档片段的初始视图（即放大和平移之前）可以是“标准”视图，即基于<svg>元素的属性，例如viewBox）或“自定义”视图（即指向特定<view>或其他元素的超链接）。如果初始视图是“标准”视图，则此属性为false。如果初始视图是“自定义”视图，则此属性为true。

SVGSVGElement.currentView

SVGViewSpec定义当前最里面的 SVG 文档片段的初始视图（即，放大和平移之前）。意义取决于具体情况：如果初始视图是“标准”视图，则：

viewBox，preserveAspectRatio和currentView中的zoomAndPan的值将与值匹配对于SVGSVGElement直接打开的相应 DOM 属性
} currentView中的transform和viewTarget的值将为 null

如果初始视图是<view>元素的链接，那么：

在currentView中viewBox，preserveAspectRatio和zoomAndPan的值将对应于给定<view>元素的相应属性
} currentView中的transform和viewTarget的值将为 null

如果初始视图是指向另一个元素的链接（即，除了<view>之外的其他元素，则：

viewBox，preserveAspectRatio和currentView中的zoomAndPan的值将与值匹配对于SVGSVGElement直接用于最近祖先<svg>元素的相应 DOM 属性
currentView中transform的值将为 null
currentView中的viewTarget将代表链接的目标

如果初始视图是使用 SVG 视图规范片段标识符（即#svgView（...））链接到 SVG 文档片段，则：

the values for viewBox, preserveAspectRatio, zoomAndPan, transform and viewTarget within currentView will correspond to the values from the SVG view specification fragment identifier

SVGSVGElement.currentScale

On an outermost <svg> element, this float attribute indicates the current scale factor relative to the initial view to take into account user magnification and panning operations. DOM attributes currentScale and currentTranslate are equivalent to the 2x3 matrix [a b c d e f] = [currentScale 0 0 currentScale currentTranslate.x currentTranslate.y]. If "magnification" is enabled (i.e., zoomAndPan="magnify"), then the effect is as if an extra transformation were placed at the outermost level on the SVG document fragment (i.e., outside the outermost <svg> element).

SVGSVGElement.currentTranslate 只读

An SVGPoint representing the translation factor that takes into account user "magnification" corresponding to an outermost <svg> element. The behavior is undefined for <svg> elements that are not at the outermost level.

Methods

This interface also inherits methods from its parent, SVGGraphicsElement and also implements the ones from SVGZoomAndPan, SVGFitToViewBox.

SVGSVGElement.suspendRedraw() 已弃用

Takes a time-out value which indicates that redraw shall not occur until:

the corresponding unsuspendRedraw() call has been made, an unsuspendRedrawAll() call has been made, or its timer has timed out.

In environments that do not support interactivity (e.g., print media), then redraw shall not be suspended. Calls to suspendRedraw() and unsuspendRedraw() should, but need not be, made in balanced pairs.

To suspend redraw actions as a collection of SVG DOM changes occur, precede the changes to the SVG DOM with a method call similar to:

suspendHandleID = suspendRedraw(maxWaitMilliseconds);

and follow the changes with a method call similar to:

unsuspendRedraw(suspendHandleID);

Note that multiple suspendRedraw calls can be used at once and that each such method call is treated independently of the other suspendRedraw method calls.

SVGSVGElement.unsuspendRedraw() 已弃用

Cancels a specified suspendRedraw() by providing a unique suspend handle ID that was returned by a previous suspendRedraw() call.

SVGSVGElement.unsuspendRedrawAll() 已弃用

Cancels all currently active suspendRedraw() method calls. This method is most useful at the very end of a set of SVG DOM calls to ensure that all pending suspendRedraw() method calls have been cancelled.

SVGSVGElement.forceRedraw() 已弃用

In rendering environments supporting interactivity, forces the user agent to immediately redraw all regions of the viewport that require updating.

SVGSVGElement.pauseAnimations()

Suspends (i.e., pauses) all currently running animations that are defined within the SVG document fragment corresponding to this <svg> element, causing the animation clock corresponding to this document fragment to stand still until it is unpaused.

SVGSVGElement.unpauseAnimations()

Unsuspends (i.e., unpauses) currently running animations that are defined within the SVG document fragment, causing the animation clock to continue from the time at which it was suspended.

SVGSVGElement.animationsPaused()

Returns true if this SVG document fragment is in a paused state.

SVGSVGElement.getCurrentTime()

Returns the current time in seconds relative to the start time for the current SVG document fragment. If getCurrentTime is called before the document timeline has begun (for example, by script running in a <script> element before the document's SVGLoad event is dispatched), then 0 is returned.

SVGSVGElement.setCurrentTime()

Adjusts the clock for this SVG document fragment, establishing a new current time. If setCurrentTime is called before the document timeline has begun (for example, by script running in a <script> element before the document's SVGLoad event is dispatched), then the value of seconds in the last invocation of the method gives the time that the document will seek to once the document timeline has begun.

SVGSVGElement.getIntersectionList()

Returns a NodeList of graphics elements whose rendered content intersects the supplied rectangle. Each candidate graphics element is to be considered a match only if the same graphics element can be a target of pointer events as defined in pointer-events processing.

SVGSVGElement.getEnclosureList()

Returns a NodeList of graphics elements whose rendered content is entirely contained within the supplied rectangle. Each candidate graphics element is to be considered a match only if the same graphics element can be a target of pointer events as defined in pointer-events processing.

SVGSVGElement.checkIntersection()

Returns true if the rendered content of the given element intersects the supplied rectangle. Each candidate graphics element is to be considered a match only if the same graphics element can be a target of pointer events as defined in pointer-events processing.

SVGSVGElement.checkEnclosure()

Returns true if the rendered content of the given element is entirely contained within the supplied rectangle. Each candidate graphics element is to be considered a match only if the same graphics element can be a target of pointer events as defined in pointer-events processing.

SVGSVGElement.deselectAll()

Unselects any selected objects, including any selections of text strings and type-in bars.

SVGSVGElement.createSVGNumber()

Creates an SVGNumber object outside of any document trees. The object is initialized to a value of zero.

SVGSVGElement.createSVGLength()

Creates an SVGLength object outside of any document trees. The object is initialized to a value of zero user units.

SVGSVGElement.createSVGAngle()

Creates an SVGAngle object outside of any document trees. The object is initialized to a value of zero degrees (unitless).

SVGSVGElement.createSVGPoint()

Creates an SVGPoint object outside of any document trees. The object is initialized to the point (0,0) in the user coordinate system.

SVGSVGElement.createSVGMatrix()

Creates an SVGMatrix object outside of any document trees. The object is initialized to the identity matrix.

SVGSVGElement.createSVGRect()

Creates an SVGRect object outside of any document trees. The object is initialized such that all values are set to 0 user units.

SVGSVGElement.createSVGTransform()

Creates an SVGTransform object outside of any document trees. The object is initialized to an identity matrix transform (SVG_TRANSFORM_MATRIX).

SVGSVGElement.createSVGTransformFromMatrix()

Creates an SVGTransform object outside of any document trees. The object is initialized to the given matrix transform (i.e., SVG_TRANSFORM_MATRIX). The values from the parameter matrix are copied, the matrix parameter is not adopted as SVGTransform::matrix.

SVGSVGElement.getElementById()

Searches this SVG document fragment (i.e., the search is restricted to a subset of the document tree) for an Element whose id is given by elementId. If an Element is found, that Element is returned. If no such element exists, returns null. Behavior is not defined if more than one element has this id.

Specifications

Specification
Scalable Vector Graphics (SVG) 2 # InterfaceSVGSVGElement

Browser compatibility

BCD tables only load in the browser

参见

<circle>